boiler maker derpatments

Take one ton gas steam boiler maker derpatments, for example.

One condensing gas boiler is about 70-75 cubic meters of gas consumption, gas consumption in the gas boiler general less than 80 cubic meters. Of course, different boiler manufacturers produce equipment boiler gas consumption will be different.

Why choose ZG as wood pellet hot water boiler maker derpatments supplier?

1.Safety operation: anti-back fire feeding system, temperature sensor, low water level protection device, over-temperature protection device.

2.Anti burn back feeding system: pellets feeding system adopt double stage screw feed. The first stage is for controlling the pellet feeding quantity to make sure enough pellet fuel. The second stage makes sure there is no excess pellet in the feed screw. So it is blank between the first stage and the second stage. There is no back-fire happen and make sure the safety operation. Through reducing the load of feeding system, the wood pellet boilers feeding device will have fewer fault.

3.Intelligent Control: we adopt microcomputer one-button operation, automatic feed automatic ignition, with the setting temperature, start and stop cycle, and fault alarm function, simple and easy operation.

4.Advanced combustion system: adopt Patent inside wood pellet burner, adopt special three side air supply system, which makes sure the pellet full combustion. Equipped heat recovery device makes the boiler efficiency can reach 93%.

5.Easy to maintain: wood pellet hot water boilers belong to atmosphere hot water boilers. There is no need for professional stoker. It is automatic wood pellets feeding and automatic ignition. User just needs to add 1-2 times fuel per day. Ash cleaning is very easy, User just needs to take out of the ash bucket at the bottom of the chamber.

Since more than six months since the boiler maker derpatments equipment, heating and hot water supply well, our technical staff also view real-time remote monitoring and control through the use of the boiler to the scene, Baiyun Quan Lake hotel management staff related to our technical staff gave very great encouragement and affirmation. --customer feedback

Analysis of steam boiler maker derpatments down for maintenance and corrosion knowledge of what steam boiler down for maintenance and corrosion analysis after a close knowledge of steam boilers, must be maintained to prevent internal boiler corrosion. Second, short-term maintenance. Wet maintenance method employed; That is, after stopping the furnace, the furnace is filled with water and air is completely discharged. Third, long-term maintenance. Can be maintained using a dry method, i.e., a furnace rear stop released water, lower aperture open, the pot water dried, and the desiccant was placed in the lower aperture, regular replacement, and replacement can begin monthly check. Once, it can be done once every three months. However, it should be noted that all the desiccant must be removed before the boiler starts. Make an effective maintenance method first steam boiler, a steam boiler feedwater should be as close to the furnace temperature, preferably higher than 20 ℃. Second, we must regular inspection, maintenance and cleaning of the low water level cutting device. At least once a month to clean water level controller, water level wash at least once a day. Water level should be at the highest level; after washing, the water level should not be below the minimum safe level. If you do not wash clean, can be washed several times, but it must be cleaned at the highest level. Third, we must carry out regular sewage discharge operation, at least once (once per shift) per day. After the sewage, the sewage should check valves leak due to the influence of dirt; if so, it must be excluded. 4. When the boiler without maintaining close vapor pressure steam boiler space will keep the air and negative pressure is generated. Thus, when the re-ignition, the total steam valve should be opened first.

boiler maker derpatments Related Information

Sasol Global integrated chemicals and energy company

Sasol Limited is an integrated energy and chemical company based in Sandton, South Africa. The company was formed in 1950 in Sasolburg, South Africa.

Get A Quote

DO YOU HAVE QUESTIONS? WE ARE HERE TO HELP YOU!