Jinzhou construction and installation company needs an electric heating hot water boiler house construction, after screening and comparison of various brand boiler industry, our excellent results in the cleaning of the boiler industry has been attracted to each other, in mid-2016, the Jinzhou construction and installation the company I signed with an electric heating pressure hot water boiler.

First, before the electric boiler maintenance, we must first cut off the power, so can guarantee the security of subsequent operations.

Let us look at maintenance sites of horizontal high quality pellet steam boiler components and maintenance requirements of horizontal steam boiler is more important, the device can reduce the runtime failure, increase the service life of the boiler, noteworthy task. 1, water table maintenance: (1) cleaning interior surfaces, keep clean and (2) replacement of packing, gasket (3) repair or replace the water table 2 cocks, calibration gauge: (1) check gauge and leaded closure (2) and the trap inspection split three-way stopcock, rust appearance 3, safety valve: (1) overhaul, adjustment valve (2) 4 timely replacement of damaged parts, boiler maintenance: (1) removal of heat the outer surface of the soot and the inner surface of the scale (2) and expansion weld inspection at boiler (3) an outer access waterwall tubes (4) lights up lacquer boiler (5) in full or disabled 6 over 1 year boilers, pressure test should be carried out. 1 year of operation, the furnace should be a stop outside the test 5, the furnace walls and furnace maintenance: (1) repair replace damaged boiler steel (2) maintenance of the furnace, the furnace wall, repairing the furnace wall leak smoke, air leakage and defects internal corrosion of furnace wall (3) fix the insulation layer 6, and maintenance of coal slag hopper means: (1) Check the stoker, Java machine (2) maintenance of the hydraulic actuator, cylinder wear cup should be replaced ( 3) adjusting the grate (4) and run auxiliary operation

For example, medium pressure feed water temperature of the boiler mostly heated to 172 deg.] C, typically heated to a high pressure furnace 215 ℃. Since the causes of the leakage of high pressure heater, water supply to the boiler feed water through the bypass when the high pressure splitting operation in the heater. After the temperature of the boiler feed water decreases, the fuel portion of the heat to be used to increase the water temperature.